Saturday, September 12, 2015

Saturday Slump

I started out a bit rough-the needle pulled out of its connector and I had to start again!  
I have this one complaint about the KnitPick needles-they do not stay attached in the metal cup.  I glue it with E-6000 and they stay where they belong after that! 
Since I spent most of the day in the recliner, I got a lot of knitting done! 
I didn't have too much trouble designing the mitt;  I used the basic pattern I designed from the Pointedly Ribbed Mitts in my Ravelry store so I just had to center the chart and knit away!
I took good notes so I hope to have it easy making the second one!

1 comment:

  1. I had to glue my KnitPicks needles too. I also had to glue the screw part since it wouldn't stay screwed to the cable.

    I wasn't planning on using it as an interchangeable anyway, so that was not a problem. But, they really shouldn't be such a problem.

    ReplyDelete

Thanks for taking the time to let me know you stopped by to read my blog! If you can't get the blog to accept a comment-email me! If you don't have a blog yourself, use my email so I can then email you back-I love to respond to those who leave comments! Thanks!

ONE OF MANY

It took way longer than it should have done  but sometimes there are unavoidable obstacles! lol   But it is finished and trimmed and ready f...